Select 6 x 90 x 1000mm Carbon Grade Ground Steel Stock

Introduction

C45 is a medium carbon steel grade offering reasonable tensile strength. It can be flame or induction hardened to produce a good surface hardness with moderate wear resistance. Widely used for components that require better properties than mild steel.

Brand :Select

Material :C45

Manufacturer Part Number :173000600900100

Thickness (mm) :6

Features & Benefits : Supplied in the cold drawn or hot rolled condition, tensile properties can vary but are approximately between 500-800 N/mm
This grade can be flame or induction hardened to produce a good surface hardness with moderate wear resistance
C45 is widely used for components that require better properties than mild steel
Pre-machined, unalloyed tool steel without machining allowance – bar length 1000mm
Tolerances:
Thickness: -0,00/+0,20mm
Width: -0,00/+0,40mm
Square: -0,00/+0,20mm
Length: +5,00/+30,00mm
Thickness and width of material in ground/fine milled execution
Both bar ends saw cut
Surface roughness maximum 3.2m

Width (mm) :90

Length (mm) :1000

Tolerances Thickness (mm) :+0.05 -0

Tolerances Width (mm) :-0.000 +0.2