Gibraltar 3in Jaw Cradle Ang Vice

Introduction

Jaw surface is square to 0.002′. Pin stops at 0, 15, 30, 45, 60, 75 and 90. Scale indexed in 1 increments from 0 to 90. Two slots on each side of base for mounting to machine table. Set to any angle position firmly tool-less locking.

Brand :Gibraltar

Jaw Depth (in) :1-1/2

Manufacturer Part Number :70038104

Additional Information :Designed for drilling, tapping or reaming operations where a vertical setup angle is required

Features & Benefits : Jaw surface is square to 0.002′
Pin stops at 0, 15, 30, 45, 60, 75 and 90
Scale indexed in 1 increments from 0 to 90
Two slots on each side of base for mounting to machine table
Set to any angle position firmly tool-less locking
Designed for drilling, tapping or reaming operations where a vertical setup angle is required
Cradle base has a 90 vertical scale in 1 graduations
Quick setup at 0, 45, 60 and 90 with positive pin stops
Hand-tightened mechanism allows secure locking in all positions
Base includes 1/2′ shoulder slots for bolting to drill press

Jaw Width (in) :3

Jaw Opening (in) :3

Type :Cradle Angle Vises