DeWalt D24000 250mm Corded 1600W Wet Tile Saw 240V With Slide Table & Leg Stand

Introduction

The DeWalt D24000 Wet Tile Saw with Slide Table is used for cutting tiles and a number of other building materials including ceramic, natural stone and composite material, interior and exterior tiles. The depth of a building tile cut with this saw ranges from 20mm to 60mm. Due to the fixed head and patented sliding bed, the D24000 is extremely easy to use. Whether rip, bevel or plunge cutting, the saw is quick and easy to adjust and extremely accurate.

The stainless steel rail system is integrated into the tile saw frame, ensuring accurate cuts. The cantilevering rail/cart system allows for 610mm ripping capacity and an integrated 45/22.5 feature for quick angle cuts. There is a plunge feature that allows the user to make quick plunge cuts for electrical outlets and the dual water nozzles can be adjusted for optimal water placement on the blade in order to minimise over-spray and mist.

Rear and side water attachments can be placed on the tile saw to catch overspray – keeping the water in the pan and a removeable cutting cart for easy cleaning of tile saw.The edge guide has two positions, 90 and 45, allowing for easy line up of corner cuts.

Features

• Straight cut along the long size of the tile
• Straight cut along the short size of the tile
• Cutting out a section of tile by making a cut on adjacent sides of the tile with each point meeting
• Clean out the inside corner after an L-cut
• Cut a tile to fit around an AC receptacle 45 angle cut to make tiles fit together on outside corners without using a bullnose tile
• Cut a square tile from corner to corner with exact accuracy
• Clipping tile corners
• U-cuts

Specification
Part No: D24000-GB
Weight, kg: 31.300000
GTIN: 5035048928912
Barcode: 5035048928912
Brand: DeWalt
Input Power: 1600 W
Disc diameter (mm): 250 mm
Max Depth of Cut: 95 mm
Crosscut Capacity at 90: 610 mm
Crosscut Capacity at 45: 450 mm
Voltage (V): 240 V
Type: Tile Saw
Power Source: Corded